Step 1: Verify that grid voltage matches microinverter rating
Step 2: Install the microinverters in proper position
The Microinverter EZ1 can be installed on the balcony wall or fixed to the
railing using cable ties. Select an appropriate installation method based on
your actual scenario to ensure that the EZ1 is securely installed.
NOTE: Install the microinverters in proper position to avoid direct
exposure to rain, UV or other harmful weather events.
Do NOT carry the microinverter by
the AC cable. This may cause the
AC cable to partially or fully
disconnect from the unit, resulting
in no or poor operation.
To Next Page
Loading...
