APsystems EZ1 Series - APsystems Microinverter System Introduction

4
EN
Step 4: Connect the APsystems microinverter to power cord
Insert the microinverter AC connector into the power cord connector.
NOTE: When inserting, make sure to align the connector with its limit
position, otherwise it may pose a personal safety risk.After aligning the
limit position, insert the connector all the way in, and then tighten the
connector’s connection thread on the inverter side clockwise until there
are no gaps.
Step 5: Cable Connection
Insert the power cord into the socket.
Install APP
Please scan this QR code to have access to our APPs.
·Go to App Store
·Search “AP EasyPower”
·Download and install
NOTE: iOS: 10.0 and up
·Go to Google Play Store
·Search “AP EasyPower”
·Download and install
NOTE: Android: 7.0 and
①
②