APT-1 – User’s Manual (EU) Rev. 2019-01 en for il 11
SECTION B – USER INFORMATION
6. PREPARING THE APT-1 HI-LO
6.1. Moving your APT-1 Hi-Lo
The APT-1 Hi-Lo can easily be moved by lifting the end of the frame
and pushing the unit using its wheels, see Figure 4.
6.2. Positioning the APT-1 Hi-Lo
Position the APT-1 Hi-Lo close to an electrical socket outlet. The ad-
justable feet on the underside keep the APT-1 Hi-Lo level and prevent
it from sliding.
NOTE: Ensure that the APT-1 Hi-Lo is level in order to prevent damage
to the trainer or its components.
If readjustment of one of the feet is needed, open the contra nut (4A/1),
turn the foot (4A/2) to the desired height and secure the foot with the
contra nut (4A/1).
To Next Page
Loading...