APT-1 – User’s Manual (EU) Rev. 2019-01 en for il 28
14. TROUBLE-SHOOTING
Hereunder are some types of disorders, which can usually be repaired ra-
ther simply. If these following measures are unsuccessful, an authorized
dealer should be contacted!
The APT-1 does not function at
all
Power Supply not connected
properly to mains outlet or to the
APT-1.
APT-1 in standby mode. Press the
button to enter active or
passive modes.
(Models with Stop-switch) Stop
switch in lower - disconnection posi-
tion. Turn switch anti-clockwise to
release.
The crank-arms do not start to ro-
tate in the passive mode
No load/speed selection button is
selected (pushed inwards)
(Models with Independent Speed
controller) Speed control Knob is in
the “0” (off) position. Turn knob
clockwise to desired exercise
speed.
Models with remote control: re-
mote unit not functioning
smoothly
Remote unit’s transmitter LED
needs to be wiped clean
Remote unit batteries need replace-
ment
To Next Page
Loading...