aptos MAC DTU - DTU Installation Process; Installation Sequence Steps; Pre-installation Preparation

9
1. Install the PV modules and
microinverters and repeater
2. Locate the DTU
9. Wall-mount the DTU (optional)
4. Start procedure
5. Normal operation
7. Add Microinverter ID
6. Login the local interface of the DTU
8. Check the Communication
between Microinverters and DTU
(Unit: mm)
4.4 System Installation Sequence
4.5 Preparation
A. Download the Aptos mobile App
3. Connect to the Internet
© 2021 Aptos Solar Technology, LLC. All rights reserved.
MAC
TM
DTU