FCC compliance statement
This device complies with Part 15 of the FCC rules. The operating
equipment must meet the following two conditions:
(1) This device will not cause harmful interference;
(2) This device can withstand any external interference, including
interference that may cause unintended operation.
[Warning] If the user makes changes or modifications without the express
permission of Aitus, he may lose the right to continue to operate the device.
[Note] This device has been tested and determined to comply with the limits
of a Class B digital device (in accordance with Part 15 of the FCC rules).
These limits are designed to provide reasonable protection from harmful
interference in residential installations. This device generates, uses, and
can radiate radio frequency energy. If it is not installed and used in
accordance with the instructions, it may cause harmful interference to
radio communications. However, under certain installation conditions,
there is no guarantee that such interference will not occur. If this equipment
does cause harmful interference to radio or television reception, and this
can be determined by turning off and on the equipment, it is recommended
that the user try one or more of the following measures to eliminate the
interference:
Increase the distance between the equipment and the receiver.
Connect the equipment to an outlet on another circuit, not the outlet on
the circuit to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
FCC radiation exposure statement
This device complies with FCC radiation exposure limits for uncontrolled
environments.
To Next Page