EasyManua.ls Logo

Aputure Light Storm LS 60x - Power Supply Methods; AC Power Connection; Battery Power Configurations

Aputure Light Storm LS 60x
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-9-
AC 100V-240V
~
~
2. Battery powered
1) Single battery power supply
* Rotate the red rotary ring of the DC input connector clockwise, then pull out to remove the adapter.
* Rotate the red rotary ring of the DC input connector clockwise and then pull it out to remove the
battery case. Do not pull it out forcibly.
* When using a single battery for power supply, be sure to install the battery in the battery slot
corresponding to the red key;When removing the battery, press the red lock button to pull out
the battery. Do not hard pull out.
* Single battery: Voltage 6~8.4V; Recommended ≥6.6A continuous discharge.
1. Ac power supply
The power supply