EasyManua.ls Logo

APV W+10/8 - 4 Introduction; The W+ Range; The W+ Pump, Standard and Auxiliary Equipment; Identification of Pump Models

APV W+10/8
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPX Flow Technology
Hermana Frankego 9, 85-862 Bydgoszcz POLAND
XXXXXX
W+22/20 125
3412032
GB
Form no.: L453147GB– revision 06/2013
4. Introduction
4.1 The W+ range
ThismanualcoversthestandardversionsoftheW+pumpaswell
astheasepticversions:Wa+andpumpswithaninducer(Wi+).
Checkthepump'snameplatetodeterminewhetheryouhave
oneofthesemodels.TheWHP+andW+140/50aredescribed
inaseparatemanualwhichissuppliedwiththepump.TheWK+
(pedestalpumpversion)isdescribedinasupplementarymanual.
4.2 The W+ pump, standard and auxiliary equipment
Standard options:
- Withorwithoutmotorcover.
- Withframeandfeetorrmsupports.
- Withshaftsealincarbon/SiCorSiC/SiC.
- Witho-ringsinEPDMorFPM(Viton).
- Withsinglemechanicalordoublemechanicalseal,ttedforwater-
ushedorsteam-ushedshaftseal(Wa+)
Additional options:
- Heating/coolingjacket.
- Casing drain.
- Soundabsorbingmotorcover.
- Pumpcart.
- Inducer(Wi+).
- DoubleO-ringsealforpumphousing,ttedforsterileushing
purposes.
- Heavydutyclampringwhichincreasesthepump'smaximum
permissibleoutletpressureto25bar(availableforW+30/120,
W+55/35,W+55/60,W+60/110,W+70/40)orto20bar(availablefor
W+80/80).
- W+pumpscanbesuppliedwithallstandardweldedferrules,e.g.
unions,clamprings,anges.
4.3 Identification of pump models
AnameplateasshowninFig.1isttedontheextensionframe.
Example
TypeW+22/20: Speciesthepumpmodel(W+22/20).
125: Indicatesthediameteroftheimpeller.
Serialno.: IndicatesthepumpIDnumber.
Orderno.: SpeciestheSPXFTordernumber.
Year: Showstheyearofmanufacture.
Theemptyeldcanbeusedtoidentifythepumpwithinanoverall
system.
4.4 Identification of motor models
Theplateindicatesthemotortypeandheightofconstruction
(item2),motorcapacity(kW;item1),speed,etc.
Fig. 1
Fig. 2
6
APV

Other manuals for APV W+10/8

Related product manuals