Aqua Computer high flow NEXT User Manual

high flow NEXT
17.2. Care instructions.......................................................................25
17.3. Waste disposal.........................................................................25
17.4. Contact Aqua Computer............................................................25
1.
1.1.
1. Preface
PrefacePreface
Preface
The high flow NEXT is a high precision USB enabled flow sensor with integrated
coolant temperature sensor as well as conductivity sensor for coolant quality moni-
toring. It features integrated RGBpx lighting and a connector for additional RGBpx
components as well as an OLED display.
Considering the fast technical development, we reserve the right to perform alter-
ations to the products at any time. It therefore is possible that your product does
not correspond precisely to the descriptions or especially the illustrations in this
manual.
2.
2.2.
2. Safety precautions
Safety precautionsSafety precautions
Safety precautions
The following safety precautions have to be observed at all times:
● Read this manual thoroughly and entirely!
● Save your data onto suitable media before working on your hardware!
● This product is not designed for use in life support appliances, devices, or
systems where malfunction of this product can reasonably be expected to re-
sult in personal injury. Aqua Computer GmbH & Co. KG customers using or
selling this product for use in such application do so at their own risk and
agree to fully indemnify Aqua Computer GmbH & Co. KG for any damages
resulting from such application!
3.
3.3.
3. Assembly instructions
Assembly instructionsAssembly instructions
Assembly instructions
Integrate the sensor into your cooling system, directions of flow can be freely cho-
sen. For optimum performance and minimum noise, the buttons and the white illu-
minated area of the sensor should be facing upwards.
4.
4.4.
4. Electrical connections
Electrical connectionsElectrical connections
Electrical connections
ATTENTION: Completely turn off your power supply or disconnect the mains pow-
er cord from the wall outlet before connecting or disconnecting any cables to/from
the device!
4.1.
4.1.4.1.
4.1. Connector “USB”
Connector “USB”Connector “USB”
Connector “USB”
This connector is used for USB communication with a PC. Connect to an internal
USB header of your motherboard. Take special care to make sure the pin align-
ment matches your motherboard!
- 4 - Aqua Computer GmbH & Co. KG © 2020
Gelliehäuser Str. 1, 37130 Gleichen
c
o
m
p
u
t
e
r
a
q
u
a

Aqua Computer high flow NEXT Specifications

General

Brand	Aqua Computer
Model	high flow NEXT
Category	Accessories
Language	English