Aqua Lab PRE - Troubleshooting Common Error Messages; High Water Activity Readings Error; Low Water Activity Readings Error; Samples Taking Too Long Error

11
Water activity readings are too high!
Sample temperature greater than 4 degrees Celsius above AquaLab
sensor causes error.
Water activity readings are too low!
Sample water activity below about 0.03 displays aw < last stable value.
Samples taking too long!
See Section 8 for samples taking longer than five minutes for final aw
reading.
Mirror contamination warning!
See Section 11 for “Mirror Contamination Warning” and cleaning
instructions.
Additional Help? support@aqualab.com / 509-332-5601 7am-5pm (Pacific)
Common Error Messages
Troubleshooting
!