Ready! Sample Test
Product- Step 3
7
Place a sample of your product in a new sample cup.
Cover the bottom of the sample cup as much as possible.
If your product is larger than the cup, it will be necessary
to make the product smaller to fit the sample cup.
Ensure the rim and outside of the sample cup are clean.
If you don’t immediately test the sample, cover it with
a lid to avoid moisture loss or gain.
Ensure sample temperature is within 4 ˚C of the instrument
temperature.
1
2
3
4
5
6
Do not overfill the sample cup
(no more than half full)
Warning!
To Next Page
Loading...
