Congratulations on your new PRE Water Activity Meter.
This guide will help you begin gathering data in just a
few short steps.
The Setup
1
Customer support: support@aqualab.com / 509-332-5601 8 a.m. to 5 p.m. (Pacific)
Let instrument warm up for
15 minutes.
3
Wash hands and continue
reading this guide during
instrument warm up.
4
Plug in instrument with black
power cord. Turn on by flipping
the rocker switch on the back of
the instrument.
2
Place on level surface,
in a stable environment*
*Optimal Temperature 25˚C
1
15 MIN
To Next Page
Loading...