6
Code
Operation Error Description
EAC Lock + boiling light blink Wrong input AC power
DSO Lock + 95°C light blink Running without water
ENTC Lock + 90°C light blink NTC failure
E09 Lock + 80°C light blink No power to element/heater
This symbol on the products and accompanying documents means that used electrical and electronic products
should not be mixed with general household waste.
For proper disposal or treatment, recovery and recycling, please take these products to designated collection
points where they will be accepted on a free of charge basis. In some countries you may be able to return your
products to your local retailer upon the purchase of a new product.
Disposing of this product correctly will help you save valuable resources and prevent any possible eects on human health
and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for
further details of your nearest collection point for WEEE.
Penalties may be applicable for the incorrect disposal of this product in accordance with national legislation.
This appliance conforms to the (LVD) 2014/35/EU, (EMC) 2014/30/EU, (RoHS) 2011/65/EU and (ERP) 2009/125/EC directives.
This appliance conforms to the UK Electrical Equipment (Safety) Regulations 2016, Electromagnetic Compatibility
Regulations 2016, The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012 and The Ecodesign for Energy-Related Products Regulations 2010.
The appliance is designed for domestic and small oce use only. It should not be used for commercial purposes.
Do not immerse in water.
Warning! Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
Condition
Possible cause Solution
Machine will not start. Appliance is unplugged. Ensure the power cord is inserted in the appliance and
the plug is securely placed into the socket.
Machine will not dispense. Appliance requires rinse
cycle.
Perform rinsing cycle using the instructions in section 5.
Descale/Rinse warning symbol
is flashing on screen.
Appliance needs
descaling.
Perform descale cycle using the instructions in section
6.
Descale/Rinse warning symbol
is constantly illuminated on
screen.
Appliance needs rinsing. Perform rinsing cycle using the instructions in section 5.
Refill water warning symbol on
screen.
Water tank is empty. Refill water tank to above minimum level.
Tank may not be fitted
correctly.
Reassemble the water tank, making sure that the top of
the tank is flush with the top of the machine.
Appliance water flow
decreases, or scale can be
observed in the dispensed
water. Descale/Rinse warning
symbol is not visible on screen.
Scale has built up inside
the appliance.
Perform manual descale cycle using the instructions in
section 6.
Change filter warning symbol
on screen (will illuminate after
100L).
Filter life expired. Change filter following the Aqua Optima filter
instructions. Reset filter warning symbol by holding for
3 seconds.
TROUBLESHOOTING
To Next Page
Loading...
