Aqualisa ilux Digital Series - Pre-set Shower Operation (Diverter)

Shower pre-set control
To store the pre-set button settings, follow the procedure
below:
1. Press the Start/Stop button.
2. Press and hold to select the desired outlet.
3. Select the desired temperature setting.
4. Select the desired flow rate.
5. Press and hold the desired pre-set button for 3 seconds.
The selected pre-set button will remain constantly lit
to indicate the controller has accepted the desired pre-set
outlet, temperature and flow rate settings.
6. Press the Start/Stop button to finish showering.
ilux Digital Shower with diverter– pre-set operation
15
ilux LAVINGTON User revisedv2.qxd:Layout 1 21/11/12 11:56 Page 15