Aqualisa ilux Digital Series - Pre-set Shower Operation

Shower pre-set control
To store the pre-set button settings follow the procedure
below:
1. Press the Start/Stop button.
2. Select the desired temperature setting.
3. Select the desired flow rate.
4. Press and hold the desired pre-set button for 3 seconds.
The selected pre-set button will remain constantly lit
to indicate the controller has accepted the desired pre-set
temperature and flow rate settings.
5. Press the Start/Stop button to finish showering.
ilux Digital Shower control – pre-set operation
06
ilux LAVINGTON User revisedv2.qxd:Layout 1 21/11/12 11:52 Page 6