17
ilux Digital Shower remote control
ilux Digital shower remote control is fully mobile and can be removed from the fixing cradle to
a more convenient location, operating up to 10m from the Digital bath control. The remote
control is water resistant though full submersion in water should be avoided.
1. To operate the shower in manual mode, press the Start/Stop button
on the remote, the shower will start in the last used flow and
temperature setting with water coming from the default outlet as set
on commissioning. To switch to an alternative outlet, press and hold
the Start/Stop button.
2. Once set at the controller, start the shower using the pre-set buttons
by pressing the desired pre-set. The shower will start in the pre-set
outlet, flow and temperature.
When the remote battery power is running low, the green Eco
flow setting LED on the shower control will glow red.
ilux Digital Shower with diverter remote control
ilux LAVINGTON User revisedv2.qxd:Layout 1 21/11/12 11:57 Page 17
To Next Page
Loading...
