Quartz bath with overflow filler installation instructions Page 12
A further data cable socket has been provided for use with the
secondary Digital remote control or Digital diverter. This can be
accessed by carefully snapping and removing the entry pillar and
connecting the cable as described above.
!
Unscrew the single fixing on top of the
processor box and then carefully tilt the
lid up and off the location lugs and pull
the lid clear.
15
Connect the low voltage data cable into
the socket adjacent to the temperature
adjuster as indicated on the label. Feed
the cable out of the processor box
ensuring it is correctly routed within the
data cable channel.
16
To Next Page
Loading...
