Need help?Do you have a question about the Aqualisa Quartz Digital and is the answer not in the manual?
General| Type | Digital Shower |
|---|---|
| Temperature Control | Thermostatic |
| Installation | Concealed or Exposed |
| Warranty | 5 Years |
| Control | Remote Control |
| Compatibility | Gravity, Combi Boiler, High Pressure |
| Features | Eco mode |
| Power Supply | Mains |
Overview of the installation guide for the Aqualisa Quartz Digital exposed shower system.
Visual identification of components specific to High Pressure/Combi shower system installations.
Visual identification of components specific to Gravity Pumped shower system installations.
Essential safety guidelines for installation, electrical connections, and adherence to water supply regulations.
Requirements and considerations for installing the Digital Gravity Pumped shower system.
Requirements for HP/Combi systems, including pressure, combination boilers, and seasonal notes.
Specific recommendations for pump rating, cistern capacity, and pump types for gravity systems.
Guidance on push-fit connection methods, limitations, pipe sizing, and material suitability.
Instructions for flushing pipework before connection and post-installation user familiarization.
Approved orientations for processor installation to ensure safe operation and accessibility.
Fitting isolation valves and routing pipework, noting inlet centres and support requirements.
Selecting an accessible location and securely mounting the Digital processor onto a suitable surface.
Flushing hot and cold supply pipes prior to processor connection, observing temperature limits.
Attaching cold and hot supply pipes to the processor, with warnings about soldering near plastic components.
Preparing the ceiling entry point, drilling, and feeding the riser rail assembly with cables.
Steps for sliding and securing the fixing brackets and support pillars for the riser rail assembly.
Installing rail end covers and the ceiling plate to complete the riser rail assembly.
Connecting the outlet pipe, ensuring correct pipework, and connecting the processor power to a fused spur.
Opening the processor box and connecting the low voltage data cable to the appropriate socket.
Connecting power, running the shower for flushing, and then isolating the electricity supply.
Threading the shower hose, securing the handset, and placing it into the handset holder.
Setting processor flow rate modes (HP, Gravity, ECO, COMBI) for optimal performance.
Restoring power, testing the shower, and adjusting the maximum temperature setting.
Ensuring all copper pipework is cross-bonded and connected to a reliable earthing point.
Contact details for customer support, sales, and service for Aqualisa products.
To Next Page
