Quick Start
WAKE UP, (POWER ON)
AND POWER OFF
SHOWER ON
TEMPERATURE
FLOW SELECT OUTLET*
Push and hold Q
TM
lever for over
3 seconds then release when
desired outlet icon appears.
Adjust during
showering only.
Adjust before or
during showering.
* Divert models only
You can prepare your temperature and outlet before you switch on the shower, or
adjust with ease while showering.
The controller has a proximity sensor, so as you approach or move your hand towards
the controller, the display wakes up and is ready to go.
(You can disable this feature in the Settings menu - see page 12).
Wake-up
The proximity sensor detects
any object directly in front, at
approximately 0.5m away from
the controller. See page 17 for
more information.
0.5 metres
4 5
To Next Page
Loading...
Need help?
General
