Aqualisa Quartz Touch User Manual

SETTINGSHOME
Wifi
Auto Wake up
Auto Wake up
EDITING A SETTING
To change a setting, push the lever. Move the lever left or right to choose your
preference, (the active setting is in darker type) and push the lever to confirm. A tick
will briefly appear to confirm your choice.
Settings
Quartz Touch
TM
features optional settings to enhance your shower.
To enter Settings, from the Home Screen, move the lever left or right until the
Settings screen appears. Push the lever to enter. Access to the settings menu is only
available when water is not flowing.
BROWSING THE
SETTINGS MENU
When in the Settings menu,
move the Q
TM
lever left or
right to browse.
Auto Wake up
ON OFF
Auto Wake up
ON OFF
Settings
Confi gure outlets
CONFIGURE OUTLETS
This setting enables you to choose the icons that represent your
outlets, and change the primary outlet. (See page 14 for details).
Pair a remote
PAIR A REMOTE
If you have purchased a remote control, please refer to the separate
instructions supplied.
WI-FI
To connect to the Aqualisa app and enable shower functionality using
your personal smart devices.
Wifi
Auto Wake up
AUTO WAKE UP
This setting allows the Wake Up feature to be turned o. This may be
required if you have a small shower enclosure, and the controller is
permanently active. Factory default: ON.
Factory
reset
Firmware update
About My Q
FACTORY RESET
Reset all settings to factory default.
FIRMWARE UPDATE
This setting should only be used under advice from Aqualisa Customer
Service or by an Aqualisa Service Technician.
ABOUT MY Q
For Aqualisa Service Technician use.
12 13

Aqualisa Quartz Touch Specifications

General

Brand	Aqualisa
Model	Quartz Touch
Category	Controller
Language	English