Quartz™ Bath Installation Guide 11
17
Reinstate the electrical supply to the Quartz Smart Valve
™
. Press the ‘Start/Stop’
button on the bath controller to turn the bath on.
18
Run the bath at maximum temperature (factory pre set to
45ºC). If required, maximum temperature adjustment can
be made with a flat bladed screwdriver using the ‘MAX TEMP
ADJUSTMENT’ control as indicated. When the temperature
has been set to the desired position, carefully replace the
Quartz Smart Valve
™
lid and secure the fixing screw, hand
tight only.
Site conditions can aect temperature settings, installer to adjust as required.
To Next Page
Loading...
