Aqualisa QUARTZ - Page 14

Quartz™ Bath Installation Guide 14
QUARTZ
™
BATH OVERFLOW FILLER
The bath overflow filler is suitable for baths up to a maximum thickness of 24mm.
•
!
Installation videos are available on our website www.aqualisa.co.uk/installation-videos
or alternatively, scan the QR codes on the reverse of this guide.
Carefully unscrew and remove the overflow filler outlet from the
body assembly and set aside.
1
Carefully unscrew and remove the bath waste clicker assembly
from the waste body and set aside.
2
Oer the bath waste into position ensuring the rubber washer is
correctly aligned between the waste assembly and the bath base.
3
Ensuring the rubber washer is correctly aligned, pass the bath
waste clicker through the bath and secure to the waste body
assembly.
4