AquaMaster
®
Owner’s Manual 1/21/2021 32
Water Conditioner Specifications
Max Compensated Hardness gpg (mg/L)
Maximum ferrous iron reduction
1
Minimum pH (standard units)
Media type and amounts
Self Cleaning Filter Media.
Super Fine Mesh Resin Total–
0.7 cu. ft. (0.02 cu. m.)
Self Cleaning Filter Media.
Super Fine Mesh Resin Total–
1 cu. ft. (0.03 cu. m.)
Redox Media–4 lb (1.8 kg)
Activated Carbon–0.25 cu. ft.
(0.007 cu. m.)
Super Fine Mesh
Resin–0.7 cu. ft. (0.02 cu. m.)
Total: 1 cu. ft. (0.03 cu. m.)
Salt
2
- Capacity- Water- Time-
Pounds Grains Gallons Minutes
1 4,500 14.5 18:30
(0.5) (292) (54.8)
1 5,500 17.2 24:00
(0.5) (356) (65.1)
1 5,100 18.5 18:30
(0.5) (330) (70.1)
Salt
2,3
Capacity- Water- Time-
Pounds Grains Gallons Minutes
2.5 10,500 15 20:00
(1.1) (680) (56.8)
5.5 22,251 18.8 29:00
(3.6) (1,441) (75.7)
2.5 10,500 19 20:00
(1.1) (680) (72.0)
Salt
2
- Capacity- Water- Time-
Pounds Grains Gallons Minutes
6.5 19,100 22.4 32:00
(2.9) (1,238) (85.8)
8 28,800 23.5 33:30
(3.6) (1,702) (89.0)
6.5 18,100 23.9 32:00
(2.9) (1,173) (90.5)
Salt
2
- Capacity- Water- Time-
Pounds Grains Gallons Minutes
12 22,700 28.6 41:00
(5.4) (1,471) (108.3)
15 36,500 32 46:30
(6.8) (2,365) (121)
12 21,700 30.1 41:00
(5.4) (1406) (113.9)
Minimum / Maximum water and ambient
temperature–
o
o
40/80 (4 – 5.5) 40/80 (4 – 5.5) 40/80 (4 – 5.5)
Mineral tank size–in. (cm)
10.5 I.D. x 19 (26.7 I.D. x 48.3)
10.5 I.D. x 26 (26.7 I.D. x 66)
10.5 I.D. x 26 (26.7 I.D. x 66)
Peak flow rate @15/psi drop (1 bar)
Pressure drop at service flow rate of
8 gpm (30.3 L/min)–psi (bar)
15 (1.0) 15 (1.0) 15 (1.0)
Maximum flow rate to drain during
regeneration–backwash gpm (L/min)
2.0 (7.6) 2.0 (7.6) 3.0 (11.4)
Water Pressure (min–max psi) (bar)
Minimum water flow required–gpm (L/min)
Frequency of regeneration
Electrical rating
12 VAC, 50/60 Hz,
0.015kW-hr
12 VAC, 50/60 Hz,
0.015kW-hr
12 VAC, 50/60 Hz,
0.015kW-hr
Shipping weight—approximate–lb (kg)
1
The state of Wisconsin limits iron reduction claims to 5 ppm.
2
Use clean white pellet, cube-style, or solar salt
3
In HE mode, this is the maximum salt dosage. HE mode meets the requirement some states have regarding salt efficiency.
System conforms to NSF/ANSI 44 for the specific performance claims as verified and substantiated by test data.