Need help?Do you have a question about the AQUARK BLACK SILENCE and is the answer not in the manual?
The WARNING sign denotes a hazard, calling attention to procedures that could cause personal injury or injury to a third party.
Read instructions before installation, use, and maintenance. Installation must be done by professional staff only.
Keep power supply away from children. Switch off power during lightning/storm weather to prevent damage.
Instructions for keeping the unit upright and avoiding lifting the water union to prevent internal damage.
Lists included accessories like Water Union and Drainage kit, with connection diagrams.
Details key features like DC Twin-rotary inverter compressor, EEV Technology, and high-efficiency titanium heat exchanger.
Specifies recommended air and water temperature ranges for optimal heating and cooling performance.
Explains the two operating modes: Boost and Silence, detailing their strengths and applications.
Provides detailed technical specifications and performance data for various models under different conditions.
Shows the physical dimensions of the heat pump models in a specification diagram.
Emphasizes professional installation and the need for good ventilation.
Details power supply connection requirements, earthing, and leakage protector settings.
Presents wiring diagrams for 230V and 400V supplies, including notes on hard wiring and earthing.
Table of recommended breaker, fuse, power cord, and signal cable specs for different models.
Explains main symbols and functions: ON/OFF, Unlock, Speed Mode, UP/DOWN.
Details using Screen Lock, Power On, Temperature Setting, Mode Selection, and Defrosting.
Describes how to check operational status points like temperatures using the controller interface.
Steps for app download, account registration, and Wi-Fi connection for the heat pump.
Introduces the InverGo app for remote control, error checking, and scheduling.
Pre-operation checks including ventilation, piping, wiring, power switch, and temperature settings.
Safety guidelines for leakage checking, prohibiting ignition sources and recommending specific fluids.
Correct procedure for starting/stopping pump/machine and checking for noises.
Warnings and requirements for service personnel handling refrigerants and equipment.
Lists common failures, reasons, solutions, and critical issues requiring dealer contact.
Details various protection (E3, E5, E6, Eb, Ed) and failure codes (E1, E2, E4, E7, E8, EA, P0-P9, PA, F1-F9, Fb, FA) with meanings.
Wiring diagram for connecting a water pump with 230V, capacity up to 500W.
Wiring diagram for a 230V, >500W water pump, including a contactor.
Wiring diagram for a water pump operating at 400V, including a contactor and its coil voltage.
Explains connecting a water pump timer and heat pump wiring for pump control.
Instructions for downloading the InverGo app from Google Play Store or Apple App Store.
Steps for registering a user account via mobile number or email address.
Guide to pairing the heat pump with the InverGo app by connecting to Wi-Fi and entering the code.
Screenshots showing the process of adding the device to the app and confirming successful connection.
Demonstrates controlling the heat pump via the app, selecting modes and setting temperature.
To Next Page
General
