EasyManua.ls Logo

AQUARK MR.SILENCE MS90 - User Manual

Default Icon
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MR. SILENCE
INVERTER POOL HEAT PUMP
USER MANUAL

Table of Contents

Questions and Answers

  • Q
    qrichardAug 10, 2025
    Why is my AQUARK MR.SILENCE MS90 Heat Pump fan running but not heating?
    • O
      osolisAug 10, 2025
      If your AQUARK Heat Pump's fan is running but not providing enough heat, check for these possible causes: * **Blocked evaporator:** Make sure there are no obstructions blocking the evaporator. * **Blocked air outlet:** Ensure that the air outlet is free from any obstacles. * **Start delay:** The unit may have a 3-minute start delay. If this is the case, wait patiently for the heating to begin.
  • D
    Danny WhiteAug 19, 2025
    What to do if AQUARK MR.SILENCE MS90 Heat Pump doesn’t run?
    • K
      Katie AndrewsAug 19, 2025
      If your AQUARK Heat Pump isn't running, the following could be the reasons: * **No power:** There might be a power outage. Wait for the power to be restored. * **Power switch is off:** Ensure that the power switch is turned on. * **Fuse burned:** Inspect the fuse and replace it if necessary. * **Breaker is off:** Check the breaker and switch it on if it has tripped.
  • J
    James Galvan Jr.Aug 30, 2025
    What to do if my AQUARK MR.SILENCE MS90 display is normal, but there is no heating?
    • V
      vpetersonAug 30, 2025
      If your AQUARK Heat Pump display is normal, but there's no heating, consider the following: * **Set temperature:** The set temperature might be too low. Adjust it to a suitable heating temperature. * **Start delay:** There could be a 3-minute start delay. If this is the case, wait patiently.

Summary

Safety Precautions

Warning

General warning symbols and their meanings for hazard identification.

Attention

Important points to observe for safe operation and installation.

Safety

Crucial safety instructions for installation, usage, and maintenance.

About Your Heat Pump

Technical Parameters

Detailed technical specifications, including heating capacity and COP for various models.

Installation Guidance

Installation Reminder

Crucial reminders and warnings for professional installation personnel.

Location and Water Pipe Connection

Guidance on choosing a suitable location and connecting water pipes for optimal function.

Wiring

Instructions for safe and correct electrical wiring and connections.

Electric Wiring Diagram

Protecting Devices and Cable Specification

Operation Guidance

Key Function

Operation Instruction

Defrosting

Testing

Inspect Before Use

Leakage Detection

Trial Operation

Maintenance

Troubleshooting for Common Faults

Repairing Guidance

General guidance and warnings regarding repair procedures and qualified personnel.

Failure Solutions and Codes

A table listing common failures, their reasons, and solutions.

Protection and Failure Codes

A list of protection and failure codes with their descriptions for diagnosing issues.

Wi-Fi Operation

APP Pairing

App Operation

AQUARK MR.SILENCE MS90 Specifications

General IconGeneral
BrandAQUARK
ModelMR.SILENCE MS90
CategoryHeat Pump
LanguageEnglish

Related product manuals