EasyManua.ls Logo

AQUARK MR.SILENCE MS350S - User Manual

Default Icon
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MR. SILENCE
INVERTER POOL HEAT PUMP
USER MANUAL

Table of Contents

Questions and Answers

  • J
    Jordan RobertsonAug 10, 2025
    Why is my AQUARK MR.SILENCE MS350S Heat Pump fan running but not heating?
    • P
      Philip BrownAug 10, 2025
      If your AQUARK Heat Pump's fan is running but not providing enough heat, check for these possible causes: * **Blocked evaporator:** Make sure there are no obstructions blocking the evaporator. * **Blocked air outlet:** Ensure that the air outlet is free from any obstacles. * **Start delay:** The unit may have a 3-minute start delay. If this is the case, wait patiently for the heating to begin.
  • A
    Amy GriffinAug 19, 2025
    What to do if AQUARK MR.SILENCE MS350S doesn’t run?
    • M
      manuel06Aug 19, 2025
      If your AQUARK Heat Pump isn't running, the following could be the reasons: * **No power:** There might be a power outage. Wait for the power to be restored. * **Power switch is off:** Ensure that the power switch is turned on. * **Fuse burned:** Inspect the fuse and replace it if necessary. * **Breaker is off:** Check the breaker and switch it on if it has tripped.
  • V
    Vicki HolmesAug 30, 2025
    What to do if my AQUARK MR.SILENCE MS350S Heat Pump display is normal, but there is no heating?
    • J
      John GravesAug 30, 2025
      If your AQUARK Heat Pump display is normal, but there's no heating, consider the following: * **Set temperature:** The set temperature might be too low. Adjust it to a suitable heating temperature. * **Start delay:** There could be a 3-minute start delay. If this is the case, wait patiently.

Summary

Safety Guidelines and Warnings

Hazard Warnings

Details important hazard warnings and their significance for user safety.

Important Operational Notes

Provides crucial points for safe operation and installation procedures.

General Operation Safety

Outlines general safety guidelines for installation and operation of the unit.

Installation and Setup Procedures

Pre-Installation Checklist

Important notes and prerequisites for professional installation and user safety.

Placement and Water Piping

Guidance on optimal placement and connecting water pipes for the heat pump.

Wiring and Connection Diagrams

Instructions and visual aids for safe and correct electrical wiring connections.

Cable and Protection Device Specs

User Operation Manual

Step-by-Step Operation Guide

Defrosting: Automatic and Manual

Pre-Operation Testing and Checks

Inspection Before Use

Refrigerant Leak Detection

Post-Installation Trial Run

Routine Maintenance and Care

Fault Diagnosis and Solutions

Professional Repair Guidelines

Troubleshooting Common Failures

Common failures, reasons, solutions, and error/protection codes.

Mobile App and Wi-Fi Connectivity

Download the InverGo App

User Account Setup

App Device Pairing (Bluetooth;Wi-Fi)

Guide to pairing the heat pump with the app using Bluetooth or Wi-Fi.

Heat Pump Control via App

AQUARK MR.SILENCE MS350S Specifications

General IconGeneral
BrandAQUARK
ModelMR.SILENCE MS350S
CategoryHeat Pump
LanguageEnglish

Related product manuals