K
katherinebrowningAug 3, 2025
What to do if there is a water leak from Aquasana Water Filtration Systems fittings?
- JJoshua WalkerAug 3, 2025
If you notice a water leak from the fittings, ensure a tight connection, but be careful not to overtighten, as this could cause cracks and further leaking. First, close the shut-off valve before the leak. Then, unscrew the closest union and the threaded connection. Remove any old sealing tape from the fitting, apply new sealing tape, and properly tighten the connection. Use a wrench to ensure all connections are properly tightened, but avoid over-tightening. If the problem persists, contact customer service with a pre-recorded video.