What to do if there are leaks in the inlet/outlet connections of my Aquasana Water Filtration System?
If you notice leaks in the inlet or outlet connections of your Aquasana Water Filtration System, first, remove any previously applied plumber's tape and re-apply it, ensuring the connection is properly tightened. If the issue persists, make sure you are using only NPT tapered fittings, as improper connection types can cause leaks.
How to fix leaks between the housing sump and housing head in my Aquasana Water Filtration System?
If you observe leaks between the housing sump and housing head of your Aquasana Water Filtration System, try tightening the housing further using the wrench. If the leak continues, the O-ring may be old or damaged; replace it with a new one.
Guidance on choosing an appropriate and safe location for system installation.
Details on the correct order for installing filters and other system components.
Steps for assembling and positioning the filter housings and mounting brackets.
Instructions for connecting all system components in the correct sequence and orientation.
Guidance on correctly inserting the filter cartridges into their respective housings.
Steps to perform after installation, including leak checks and initial flushing of the system.
The Aquasana EQ-FE20 Whole House Water Filter Iron Filter is designed to provide clean, healthy water by reducing iron commonly found in both well and city water supplies. This system offers peace of mind through its award-winning water filter technology, ensuring a continuous supply of filtered water throughout your home.
The EQ-FE20 system operates as a whole house water filter, specifically engineered to target and reduce iron content in your water. The filtration process begins with a Pre-Filter, which is crucial for removing larger sediments and particles before the water proceeds to the Iron Filter. This initial stage helps protect the Iron Filter from premature clogging and ensures its optimal performance. Following the Pre-Filter, water flows into the dedicated Iron Filter, where the primary iron reduction takes place. The system is designed for installation on the main cold water line entering your home, ensuring that all water used for bathing, washing, and other household activities is treated. It is imperative to install the system before the water heater to prevent damage and ensure proper filtration. The correct sequencing of the Pre-Filter followed by the Iron Filter is critical for effective operation. For more comprehensive water treatment, the Iron Filter system can be integrated into a complete water filtration setup, which may include additional components such as a Salt-Free Conditioner, a Rhino® Water Filter System, a 10" Post-Filter, and a UV Filter, depending on your specific water quality needs. These additional components would be installed in a specific sequence after the Iron Filter to address other contaminants or provide further purification. The system is designed to be installed upright to maximize contact with the media bed, which is essential for efficient filtration.
The Aquasana EQ-FE20 is designed for straightforward use and integration into your home's plumbing system. It is suitable for cold water lines only, with an operating temperature range of 40°–90°F (4.4°–32.2°C) and an operating pressure range of 20psi–100psi. The system includes clearly marked "IN" and "OUT" ports on the top of the housing to guide correct water flow direction during installation. The filter housings are designed with a notch at the bottom to center the filter cartridges, simplifying the replacement process. For installation, the system provides support brackets, shut-off valves, threaded valve adapters, reducer bushings, slip unions, and nipples, allowing for various plumbing configurations. Depending on your existing plumbing, additional parts like pex tubing, clamps, and mounting screws may be required. If your incoming water supply line is 1", a supplied reducer bushing and threaded valve adaptor can be used to reduce it to 3/4". The system can be installed as a stand-alone unit or as part of a more extensive whole house filtration system, offering flexibility to meet diverse household needs. For metallic plumbing, specific precautions, including the installation of grounding clamps and copper wire, are necessary to ensure safety and prevent electrical shock. The system is designed to be installed at an appropriate height to facilitate easy filter changes, with specific height recommendations provided for different configurations.
Maintaining the Aquasana EQ-FE20 system primarily involves regular filter replacement and general cleaning. The Pre-Filter and Iron Filter cartridges are recommended to be replaced every 6 months, though this interval may be shorter if a noticeable decrease in flow rate occurs, indicating higher sediment levels or iron concentration in your water. Genuine Aquasana replacement filters are essential to ensure continued contaminant reduction performance, prevent system damage, and maintain warranty validity. The exterior of the filtration system can be cleaned with warm, soapy water and rinsed with fresh, clean water; however, chemical cleaning products should never be used on the housing as they may cause damage. The system comes with a sump wrench to assist in tightening and loosening the filter housings during installation and filter changes. When replacing filters, the O-rings of both filter housings should be coated with the included lubricant to ensure a leak-free seal. Troubleshooting guidance is provided for common issues such as leaks between the housing sump and head, or leaks in inlet/outlet connections, offering solutions like tightening the housing, replacing O-rings, or re-applying plumber's tape. The system is backed by a limited warranty, covering defects in materials or workmanship during a specified period, provided it is installed, operated, and maintained according to the manufacturer's instructions. Aquasana also offers a "Water for Life®" program, which provides auto-delivered filter replacements with free shipping and a 15% discount, along with an extended warranty, to simplify maintenance and ensure continuous optimal performance. This program helps users stay on schedule with filter replacements without the hassle of remembering to order.
General| Product Type | Whole House Water Filter System |
|---|---|
| Flow Rate | Up to 7 gallons per minute |
| Operating Pressure | 20-100 psi |
| Operating Temperature | 40-100°F |
| Filter Capacity | 1, 000, 000 gallons |
| Installation Type | Point-of-entry |
| Contaminants Filtered | Sediment, chlorine, pesticides, herbicides, VOCs |
| Micron Rating | 5 microns |
| Connection Size | 1 inch |
| Certifications | NSF Certified |
| Filter Life | 10 years or 1, 000, 000 gallons |
To Next Page