Need help?Do you have a question about the Aquasana AQ-5300 and is the answer not in the manual?
General| Flow Rate | 0.5 gallons per minute |
|---|---|
| Installation Type | Under Sink |
| Operating Pressure | 20-80 psi |
| Warranty | 1 year |
| Filtration Technology | Activated Carbon, Ion Exchange |
| Filter Life | 6 months |
| NSF/ANSI Standards | NSF/ANSI 42, 53, 401 |
| Contaminant Reduction | Pharmaceuticals, Pesticides |
| Operating Temperature | 40-90°F |
Guidance on mounting the faucet on the sink or drilling a new hole.
List of tools needed for the installation process.
Turn off and disconnect the cold water supply before proceeding.
Attach the brass tee to the cold water supply line and shut-off valve.
Connect white tubing to the brass tee using compression nut and insert.
Install and tighten the faucet to secure it to the sink.
Connect the outlet hose to the faucet base with nut and collar.
Select a suitable space under the sink for the filter unit and mark holes.
Drill holes, tap anchors, and mount the unit to the wall with screws.
Attach sumps to the unit housing by aligning and turning them to lock.
Connect inlet/outlet tubing to the tee fitting and faucet base.
Turn on water, check for leaks, and flush filter for 10 minutes.
Battery alarm indicates 95% filter capacity; replace battery with filters.
One-year warranty on the purchased product; use genuine parts.
Filter for cold water only; handle leaks; avoid improper installation.
Details on replacement cartridge, flow rate, capacity, pressure, and temperature.
To Next Page
