What to do if the lamp is on but the Aquasana Water Filtration Systems isn't disinfecting?
If the lamp in your Aquasana Water Filtration System is lit but not disinfecting properly, the UV output may be insufficient due to the lamp's age. Replace the lamp with the correct part, as indicated on the silver label on the reactor.
How to fix a lamp problem in Aquasana Water Filtration Systems?
If your Aquasana Water Filtration System detects a lamp problem, try these steps: First, reset the lamp protection circuit by unplugging the unit for 10 seconds. If the issue persists, replace the lamp with the correct part, as indicated on the silver label on the reactor.
General| Brand | Aquasana |
|---|---|
| Model | AQ-UV-10C |
| Category | Water Filtration Systems |
| Language | English |
Specifies water quality requirements for effective UV filter operation.
Outlines key considerations and recommendations before starting the installation process.
Lists essential safety measures and warnings for operating and installing the UV filter.
Guidance on selecting the optimal placement for the UV filter system.
Pre-installation checks and options for mounting the UV reactor.
Instructions for assembling a bypass system for easier maintenance access.
Steps for connecting the UV filter and any additional filtration components.
Procedure for correctly inserting the quartz sleeve into the UV reactor.
Steps for attaching the gland nut and inserting the compression spring.
Procedure for verifying plumbing connections and checking for any water leaks.
Instructions for mounting the system's controller unit.
Guide for safely inserting the UV lamp into the reactor.
Steps for connecting the UV lamp's power connector.
Instructions for securing the ground screw on the UV reactor.
Final step to connect the UV filter to a power source.
Steps to disinfect the water lines after installation or maintenance.
Procedure for cleaning the quartz sleeve to maintain UV light penetration.
Explanation of the controller's LED indicators for UV lamp life remaining.
Guidance on resolving hard alarms and system errors displayed on the controller.
Details the warranty coverage for defects in materials and workmanship.
Lists exclusions from warranty coverage, including misuse and non-compliance.
Describes Aquasana's commitment to replacing defective parts or products.
Provides instructions on how to contact Aquasana for warranty service.
Information on registering the product for warranty coverage.
To Next Page
