To Next PageTo Next PageWhat to do if the lamp is on but the Aquasana Water Filtration Systems isn't disinfecting?
If the lamp in your Aquasana Water Filtration System is lit but not disinfecting properly, the UV output may be insufficient due to the lamp's age. Replace the lamp with the correct part, as indicated on the silver label on the reactor.
How to fix a lamp problem in Aquasana Water Filtration Systems?
If your Aquasana Water Filtration System detects a lamp problem, try these steps: First, reset the lamp protection circuit by unplugging the unit for 10 seconds. If the issue persists, replace the lamp with the correct part, as indicated on the silver label on the reactor.
General| Brand | Aquasana |
|---|---|
| Model | AQ-UV-10C |
| Category | Water Filtration Systems |
| Language | English |
