To Next PageTo Next Page
Need help?Do you have a question about the Aquasana OptimH2O AQ-RO-3 and is the answer not in the manual?
General| Brand | Aquasana |
|---|---|
| Model | OptimH2O AQ-RO-3 |
| Category | Water Filtration Systems |
| Language | English |
Steps for preparing the installation site, including checking plumbing codes and valve shut-off.
Detailed steps on how to correctly attach the ¼" white tubing to the brass tee fitting.
Instructions for applying Teflon tape, connecting the tank nipple, and measuring tubing.
Guidance on choosing an accessible location and mounting the system manifold securely.
Steps for connecting the 3/8" white tubing from the storage tank to the manifold.
How to attach the ¼" white tubing to the RO faucet body stem securely.
Instructions for mounting the faucet base and body to the sink countertop.
Steps for screwing the faucet spout onto the faucet body.
Locating the drain outlet and securing the drain connector to the sink drain pipe.
Guide on drilling the correct size hole through the drain pipe for the connector.
Guidelines for cutting and inserting tubing to ensure proper connections and prevent issues.
Connect ¼" white tubing from brass tee to manifold inlet.
Connect 3/8" red tubing from manifold to remineralizer.
Connect 3/8" white tubing from faucet to remineralizer outlet.
Connect 3/8" white tubing from tank to manifold tank port.
Connect ¼" red tubing to 90° elbow for membrane drain.
Connect 3/8" red tubing from faucet to drain connector.
Install the red carbon sump into the first stage position of the manifold.
Install the 2nd stage RO membrane and 3rd stage Claryum cartridge.
Steps for sanitizing the RO system using bleach and water.
How to perform a pressure test to identify and fix leaks.
Instructions for purging the system water for 24 hours before use.
Details on the system's water production and TDS reduction capabilities.
Maximum acceptable TDS, water hardness, and supply water pH limits.
System efficiency rating and recovery rate percentages.
Supply water temperature limits and precautions for disinfected water.
Information on arsenic types and how RO systems interact with them.
How the AQ-RO-3 system performs in reducing pentavalent arsenic.
Guidance on replacing RO components to maintain arsenic removal efficiency.
