25
Aquasure Quantum Series Multi-Stage ver1 ver2.0 (Size: A4 _ 210 x 297 mm)
USING THE SYSTEM GAUGES
The system gauges are useful for monitoring the pressure levels of your
water and also can be used for identifying a drop in pressure to one or both
of the lters located in stages one and two.
To best identify if a drop in water pressure is occurring, please record the
pressure levels when the lters and system are newly installed.
This will provide a marker for ideal water pressure. Using the new lters as a
guide for determining what your pressure levels should be.
Once you have used the system for an extended period of time the lters
may start to collect excessive contaminants in the water. This will result as a
drop in water pressure.
Record your water pressure levels when the lters are new.
When this level declines by 15 PSI, please inspect the lter cartridges.
UL TRA VIO LET LA MP BALLAST
Input: 110V - 220V AC 50/60 Hz
Max Current: 1.03A @ 110V / 0.47A @ 240V
Lamp Type: GLH048PP - GLH090PP
Lamp Power: 48 - 90 W
Lamp Current: 0.75 - 0.85A
Ambient Temperature: 32 - 104 °F ( 0 - 40 °C)
Lamp Rated Life: 365 Days
Class P
Type 1 outdoor
High Power Factor
Made in China
Total D ays Ru nnin g
Lamp Li fe
PRESS BUTTON TO DISPLAY TOTAL DAYS OF OPERATION
PRESS & HOLD BUTTON FOR 2 TO 5 SECONDS TO SILENCE
E
ND OF LAMP ALARM WARNING FOR 7 DAYS.
(MAX. 4 TIMES)
PRESS & HOLD BUTTON FOR 1O SECONDS TO RESET
LAMP LIFE WHEN NEW LAMP IS INSTALLED.
ENCLOSURE MUST BE GROUNDED.
FOR USE IN PERMANENTLY CONNECTED / FIXED EQUIPMENT ONLY.
POLARIS SCIENTIFIC UV | P.O. Box 2235 Chino Hills, CA 91709, USA
Aquasure Quantum Series Multi-Stage ver1 ver2.0.indd 25Aquasure Quantum Series Multi-Stage ver1 ver2.0.indd 25 11/9/22 9:16 AM11/9/22 9:16 AM
To Next Page
Loading...
Need help?
General
