Thank you for choosing Aquasure. This owner’s manual will guide you
through the necessary steps to install your Aquasure Quantum UV Water
Purier System.
For MAXIMUM effectiveness please thoroughly read this manual.
The information listed in this manual covers the steps for a self-serve
installation. In the event that you need support, our Aquasure technicians are
available to answer any questions during hours of operation as listed below.
Telephone:
(800) 661-0680
M-F 8:30AM - 5:30PM
Email:
support@aquasureusa.com
Online Chat:
aquasureusa.com/support
Scan the QR code
for support
WELCOME & CONGRATULATIONS
Get Familiar with the System Before Installation
IMPORTANT! Please read the entire manual and become familiar
with the instructions and parts needed before proceeding with the
installation. Hiring a professional plumber who will adhere to all local,
state and federal guidelines is recommended for a proper installation.
Inspect the System
Please take the system and all the components out of the box. Inspect
the system and all the connection ttings carefully, make sure nothing is
damaged during shipping. If any part is cracked or broken, please do not
proceed with the installation and contact Aquasure or your distributor
for an exchange or diagnosis.
To Next Page
Loading...
