EasyManua.ls Logo

AquaSure Quantum UV - System Warning & Troubleshooting

AquaSure Quantum UV
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
SYSTEM WARNING & TROUBLESHOOT
Lamp Failure System
The audible alarm and indicator lights on the systems continuously monitor the
lamp operation. If the lamp does not start at any time, the indicator red light will
glow and audible alarm will sound. This alarm indicated the UV lamp is no longer
operating and must be corrected. Please refer to Troubleshooting Guide for
corrective procedures.
Ultraviolet Monitoring System
The ultraviolet system features a complete warning system for continuous
water protection by constantly sensing the UV light operation. The system
features a single LED indicator light, which will operate two distinct colors, GREEN
and RED. When the
UV output level changes, the warning system will operate in the following manner:
Indicates that the UV lamp is satisfactory and the unit is in good
working order.
Indicates that the unit needs immediate attention, the audible
alarm will automatically sound when the LED monitor light
switches to red if the lamp has been in service for a year or more
it should be replaced. The quartz sleeve and/or sensor probe
may require cleaning. The alarm will continue until the sensor
detects adequate UV intensity. When the lamp is replaced it is
recommended to clean the quartz sleeve and sensor probe prior to
returning the system to service.
THIS ADVANCED WARNING SYSTEM HAS BEEN
INSTALLED TO PROVIDE YOU WITH THE OPTIMUM
PRECAUTIONS TO ENSURE HIGH EFFICIENCY IN
THE PROTECTION AGAINST MICROBIOLOGICAL
CONTAMINATION IN YOUR WATER. DO NOT
DISREGARD THE WARNING LIGHTS.
THE BEST WAY TO CHECK UV OPERATION IS TO HAVE THE WATER TESTED FOR
BACTERIA BY A RECOGNIZED TESTING AGENCY ON A REGULAR BASIS.
RED
GREEN

Related product manuals