AR Blue Clean AR620 User Manual

Use • Maintenance ManUal
Warning: This manual must be read before
installation or use of the unit.
Winter storage or long time
storage. Drain all water out of the
pump. Flush the pressure washer
with a 50% antifreeze solution,
and relieve the pressure. Flush the
pressure washer before you use it
again to remove the antifreeze.
AR620 & AR630 Brass
Important
Notice:
A.R. North America
Attn: Pressure Washer Warranty Department
140 - 81st Avenue NE
Fridley, MN 55432
This product is under warranty to the original retail consumer against defects
in material and workmanship for a period of 1 (one) year and is a complete
“bumper to bumper” warranty including the spray gun, the high-pressure hose
and all accessories from the date of purchase. The warranty is not transferable
or assignable. This warranty covers replacement parts. This limited one year
warranty applies only to products used in consumer applications and is void in
rental or any commercial application. Reasonable care must be used in conformity
with operation and maintenance instructions in the owner’s manual and quick
start guide. Failure to follow these instructions will void this warranty.
Warranty returns
Items returned for warranty consideration must have a Returned Merchandise
Authorization (RMA) number. All unauthorized returns will be refused and
shipped back to sender. Call 1-866-538-5112 Monday through Friday 8:00 a.m.
- 5:00 p.m (Central Standard Time). Or E-Mail to: info@arnorthamerica.com 24
hours a day.
PressUre Washer liMited Warranty

AR Blue Clean AR620 Specifications

General

Brand	AR Blue Clean
Model	AR620
Category	Pressure Washer
Language	English

Summary

Pressure Washer Limited Warranty

Warranty Returns

Details warranty coverage period and procedure for returning items for consideration.

Safety Instructions

Before Operating Safety

Essential safety precautions and guidelines to follow before operating the pressure washer.

While Operating Safety

Operating Safety Precautions

Critical safety measures and warnings to adhere to during the operation of the pressure washer.

Assembly Instructions

Pre-Assembly Checklist

Steps and checks to perform before beginning the assembly of the pressure washer.

Assembling the Unit

Assembling Steps

Detailed steps for physically assembling the pressure washer unit.

Operating Instructions

Before Starting the Pressure Washer

Key checks and procedures to follow before starting the pressure washer.

Starting and Stopping the Pressure Washer

Starting Procedure

Steps for turning on the pressure washer and achieving proper operation.

During Operation Guidelines

Important guidelines to follow while the pressure washer is running.

Stopping Procedure

Steps for safely shutting down the pressure washer after use.

Troubleshooting

Common Issues and Solutions

Diagnoses and resolves common problems like low pressure, surging, and soap injector issues.

Maintenance and Storage

Using the Soap Injector

Instructions for using the soap injector with the pressure washer.

Storing the Pressure Washer

Guidance on protecting the unit from damage during storage, especially freezing.

Starting After Non-Use

Procedure for starting the unit after it has been stored for a period.

Maintenance Schedule

Routine Checks Before Every Use

Essential checks to perform before each use for proper function and safety.

Cleaning and Usage Tips

General Cleaning Advice

Tips for effective cleaning and applying detergents or waxes.

Gun, Wand, and Nozzle Usage

Guidance on using and maintaining the gun, wand, and nozzle.

Setting Pressure and Chemical Injection

Instructions for adjusting pressure settings and using the chemical injection system.