2 Safe Air Compressor Operation
8
NOTE : Once compressed air has been expelled through the attached
device (e.g., tyre filler, air tool, etc.) and the pressure in the
system reduces the pre-set pressure switch 'ON pressure' of
930kPa [135PSI] then the compressor will automatically start
running again.
IMPORTANT :
When accessories such as the hose are connected to the
compressor they will contain compressed air. As such care
must be taken when they are disconnected from the
compressor to avoid projectiles.
• To disconnect the air hose from the compressor, press down on the hose
coupling release flange with your thumb while securely hold the hose grip
as shown.
To Next Page
Loading...
