ARC FLEX 8EX - Transmitter Operational Settings

Flex 8ES/EX Standard, AB and Tandem Instruction Manual (CE)
November 2016
Page 16 of 45
4.1.4 Transmitter Start Function Settings
When transmitter goes into sleep mode the system is temporarily deactivated (MAIN relays
opened). Execute the START command or press any pushbutton to wake up the system
(MAIN relays closed).
4.1.5 Transmitter Inactivity Timer Settings
Set how long the transmitter enters the sleep mode when not in use (pushbutton not pressed).
When transmitter goes into sleep mode the receiver MAIN relays are deactivated.
Dipswitch
Settings
Time
Dipswitch
Settings
Time
1
xxx000xxxx
1 minute
5
xxx100xxxx
10 minutes
2
xxx001xxxx
20 seconds
6
xxx101xxxx
30 minutes
3
xxx010xxxx
3 minutes
7
xxx110xxxx
60 minutes
4
xxx011xxxx
5 minutes
8
xxx111xxxx
Constant On
(sleep mode
disabled)
4.1.6 Transmitter Output Power Settings
1mW offers the shortest operating range with lowest battery consumption while 10mW offers
the longest operating range with highest battery consumption (manufacture preset at 2mW).
Dipswitch
Settings
Output
Power
Dipswitch
Settings
Output
Power
1
000xxxxxxx
1mW
5
100xxxxxxx
5mW
2
001xxxxxxx
2mW
6
101xxxxxxx
6mW
3
010xxxxxxx
3mW
7
110xxxxxxx
8mW
4
011xxxxxxx
4mW
8
111xxxxxxx
10mW
Dipswitch
Settings
Function
1
xxxxxxxxx0
START
Reactivation
2
xxxxxxxxx1
Any Button
Reactivation