SET-UP AND SAFE OPERATING PROCEDURES
11-37
89210000
The tractor needs little maintenance. To keep the Climber tractor running well, do these
things:
• Oil track-roller assemblies once a month with light grade machine oil.
• Twice a year place Moly-Kote “G” on the drive gears.
• Wear may cause the tractor to loosen on the track. Check for looseness periodically
and tighten.
CLIMBER WHEEL ADJUSTMENT
Due to track wear, the wheels on the Climber Tractor will require adjustment periodically.
The adjustable wheels are the two with the ones with the large straight bladed screwdriver
slot in them. Loosen the locking nut on these wheels located on the underside of the tractor
base plate. With a large straight bladed screwdriver rotate each wheel adjustment screw until
the wheels are snug against the track and retighten the locking nut.
ArcairClimber V_A Travel System
To Next Page
Loading...