Arcam CD5 User Manual

10
ARCAM CD5 Owner's Manual EN.docx
Menu
To access the menu, press the (MENU) button on the remote control.
To navigate the menu, use the navigation buttons on the remote control.
Menu Tree
Display
Select Display Brightness. Default is Full.
DAC Filter
Select a digital filter for the analog outputs. Default is Slow.
Eco Standby
When enabled, the CD player will enter standby after 20 minutes with no user interaction
or playback. Default is On.
Disc Auto
Disables automatic playback start when a CD is inserted. Default is On.
Reset to Defaults
Restores factory settings.
Supported Formats
Disc formats
Compact Discs (audio CDs)
Write once, recordable Compact Discs (CD-R).
Note: recordable discs must be finalized for the player to read them.
Re-writable, recordable Compact Discs (CD-RW).
Note: recordable discs must be finalized for the player to read them.
CD-TEXT discs. These discs contain text information including track names,
album and artist names.
File Formats
File Type
Bitrates
Bit Depths
Sample Rates
AAC
8 – 320 kbps
32, 44.1 or 48 kHz
FLAC
16 or 24 bit
32, 44.1, 48, 88.2 or 96 kHz
MP3
32 – 320 kbps
32, 44.1 or 48 kHz
WAV
16 or 24 bit
32, 44.1, 48, 88.2 or 96 kHz
WMA
48 – 192 kbps
32, 44.1 or 48 kHz

Arcam CD5 Specifications

General

Type	CD Player
Output Level	2.2V RMS
Power Consumption	15W
Total Harmonic Distortion	0.002%
Digital Outputs	Coaxial, Optical
Signal to Noise Ratio	110dB (A-weighted)
Outputs	Stereo RCA