Operation
Power
The power switch on the rear panel switches the CD player on or off. When you have finished making connections,
switch the player on.
Standby
The Standby button on the front panel switches the CD player between standby and on (operating).
Auto Standby
This CD player is designed to enter standby automatically after 20 minutes with no audio playing and no user
interaction. This is to meet international power consumption regulations. This can be turned off in the menu. To
use the menu, see page 10.
Playing a CD
The ARCAM CD5 can play audio and data CDs. Please refer to supported media on page 10.
If not already selected, the CD tray can be selected for playback using the right navigation key on the remote
control.
To open the CD tray, press the (eject) button on the front of the CD player, the drawer will open. Place your CD
on the tray with the label facing up (shiny side down).
Now press the (eject) button on the front of the CD player to close the drawer, or press (play) to close the
drawer and start playback.
Note: This CD player is only designed to accept compact discs. Ingress of other items (including but
not limited to foodstuffs, beverages or appendages) is likely to cause damage or injury which will
not be covered by the warranty.
Playing from a USB storage device
The ARCAM CD5 can play music files stored on a USB flash drive. Please refer to supported media on page 10.
If not already selected, the USB input can be selected for playback using the left navigation key on the remote
control.
Insert the USB storage device into the USB socket on the rear panel. Do not use a USB extension cable.
Now press (play) to start playback.
To change folder, use the up or down navigation keys on the remote control.
Note: The player will play files in a folder in chronological order.
To Next Page
Loading...
Need help?
General
