Digital Connection
Step 1, ensure power is disconnected from the CD player and amplifier.
Step 2, using a digital coax interconnect cable, connect the digital coaxial output on the CD player to a digital
coaxial input on your amplifier.
Alternatively, using an optical Toslink interconnect cable, connect the digital optical output on the CD player to a
digital optical input on your amplifier.
Top Tips
After making connections: switch the amplifier on with no input and reduce the volume to minimum. Select
the input the corresponds to your connection, and then slowly increase the volume to a suitable listening
level whilst playing a CD. This technique will avoid loud sounds or product damage in the event of incorrect
connection.
If you are unsure as to how your system should be connected, please contact your ARCAM dealer who will
be happy to help you.
To Next Page
Loading...
Need help?
General
