Need help?Do you have a question about the Arcam P1 and is the answer not in the manual?
General| Amplifier class | - |
|---|---|
| Input sensitivity | 906 mV |
| Audio output channels | 2.0 channels |
| Peak power per channel | 250 W |
| Signal-to-Noise Ratio (SNR) | - dB |
| Total Harmonic Distortion (THD) | 0.003 % |
| RMS power output per channel (8 Ohm) | 170 W |
| XLR in | Yes |
| XLR out | 1 |
| Audio (L/R) out | 2 |
| Speakers connectivity type | Binding post |
| Purpose | Home |
| Product color | Silver |
| Connectivity technology | Wired |
| AC input voltage | 115-230 V |
| Package weight | 15500 g |
Weight and Dimensions| Depth | 350 mm |
|---|---|
| Width | 430 mm |
| Height | 110 mm |
| Weight | 12500 g |
Details the amplifier's features and design goals.
Explains the power supply and control circuits.
Protects against excessive current draw from the output stage.
Detects and prevents DC voltage on the speaker output.
Monitors and reacts to thermal overload conditions.
Detects insulation breakdown in critical areas.
Specifies audio frequency range test parameters.
Specifies THD+N measurement parameters.
Specifies power output test parameters.
Describes the function of the screen for electrical isolation.
Specifies secondary winding voltages and currents.
To Next Page
