Need help?Do you have a question about the Arcam FMJ P7 and is the answer not in the manual?
Details output power per channel and total for 8-ohm and 4-ohm loads.
Specifies the maximum peak output current per channel.
States the THD levels at rated power into 4 or 8 ohms.
Outlines the frequency response curve at specified points.
Defines the hum and noise level referenced to full power.
Indicates the voltage gain factor and its output power equivalent.
Specifies the input impedance characteristics.
Defines the output impedance at different frequencies.
Lists voltage, frequency, and maximum power draw.
Provides the physical dimensions of the unit.
States the nett and packed weight of the unit.
Detailed explanation of the L924 amplifier module's circuit design and operation.
Comprehensive list of components used in the L924 amplifier module.
Detailed explanation of the controller PCB's functions and operation.
Technical specifications for PCB manufacturing and layout.
Comprehensive list of components used in the L925 controller board.
Details on the Control PCB, Interface PCB, and Main Switch/LED Display.
Technical specifications for the main power transformer.
Technical specifications for the auxiliary transformer.
Specifications for the 100V version main power transformer.
Specifications for the 100V version auxiliary transformer.
List of all parts used in the mechanical assembly of the unit.
Details and diagram for assembling the front panel.
Diagram and notes for assembling the transformer tray.
Diagram and notes for assembling the rear panel.
Diagram and notes for assembling the main chassis.
To Next Page
General
