Need help?Do you have a question about the Arcam FMJ A18 and is the answer not in the manual?
General| Input Impedance | 47 k ohms |
|---|---|
| Weight | 7.5 kg |
| Power Output | 50W per channel (8Ω) |
| Signal-to-Noise Ratio | > 100 dB |
| Input Sensitivity | 200 mV |
| Damping Factor | > 100 |
| Frequency Response | 20Hz - 20kHz ±0.5dB |
Key precautions for safe operation, installation, and handling of the amplifier.
Guidance on placement, ventilation, heat, cleaning, and power connection safety.
Covers cord safety, abnormal conditions, servicing, damage, and compliance.
Details the mains power connection and voltage check.
Explains speaker connections, PRE OUT, and phono earth terminal.
Details various analogue audio input types and auxiliary/headphone connectors.
Details PRE OUT usage and various analogue audio input types.
Explains the AV and PVR OUT sockets for recording devices.
Describes the pre-amplification stage for phono cartridges.
Conventional method of connecting one cable per channel to speakers.
Explains using two amplifiers per channel for separate frequency ranges.
Crucial safety and connection checks before powering on.
Introduces the remote control and its prerequisites for operation.
Step-by-step guide for installing batteries in the remote.
How to power the amplifier on/off and control display brightness.
How to choose between different audio inputs for listening.
Basic guide to adjusting volume, using headphones, and muting output.
Adjusting balance, bass, treble, and using Direct/Processor modes.
Checklist for diagnosing and resolving a lack of audio output.
Explanation of thermal cut-outs and potential causes for audio interruption.
To Next Page
