Why is the internet radio station sound quality poor on my Arcam AVR850 Amplifier?
If the internet radio station sound quality is poor or broken on your Arcam Amplifier, check if the radio station has a low bit rate (use the INFO key to find this or look on the OSD) and ensure your network is not slow or congested.
Why is there no sound coming from my Arcam AVR850?
To resolve no sound issues with your Arcam Amplifier, ensure the correct input is selected, the ‘Audio Source’ is correctly set in the ‘Input Confgi.’ menu, the source equipment is on and operating in ‘play’ mode if needed, and the volume is at a reasonable level while the Receiver is not muted.
What to do if no picture is being produced by my Arcam AVR850 Amplifier?
If no picture is showing on your Arcam Amplifier, verify that your viewing device is on and set to display your Receiver. Press the MENU button on the Receiver or remote to check for the main menu screen. Also, ensure the correct video input is selected on the Receiver, and the video source is on, working properly, and in ‘play’ mode if needed.
Why is the sound poor or distorted on my Arcam Amplifier?
If sound from your Arcam Amplifier is poor or distorted: * Make sure you haven't excessively increased the input sensitivity in the Input Configuration menu if using an analogue input. * Ensure you've selected the correct speaker size for your system in the setup menu.
Why does the source switching change randomly or freeze on one source on my Arcam AVR850?
To address random source switching or freezing on one source with your Arcam Amplifier: * Ensure there are no static or impulse interference problems from nearby power equipment. If there are, switch the Receiver off, wait ten seconds, then switch it back on. * Make sure there's no direct sunlight shining on the infra-red detector behind the front panel display.
What to do if files on a USB memory device cannot be played on my Arcam AVR850?
To ensure files on a USB memory device can be played on your Arcam Amplifier, verify that the USB device is formatted in FAT16 or FAT32, does not have multiple partitions, and the files are in a compatible format.
What to do if files on a computer cannot be played on my Arcam Amplifier?
If files on a computer cannot be played on your Arcam Amplifier, ensure the files are in a compatible format and that the computer is connected via a network, not USB, as the Receiver USB port cannot be used for direct computer connections.
Why is 'USB' not shown in the network client’s list of folders when a USB memory device is connected to my Arcam AVR850 Amplifier?
To ensure a USB memory device is recognized by your Arcam Amplifier, verify that the device conforms to the mass storage class and that a USB hub is not being used. When a USB memory device is connected, ‘USB’ is shown in the network client’s list of folders
Why is there hum on the analogue input of my Arcam Amplifier?
To address hum on the analogue input of your Arcam Amplifier: * Ensure all cables are making a good connection by withdrawing and re-plugging them fully (after turning the power off). * Check for broken or badly soldered connections inside the source cable connector. * If the hum occurs only with a specific source, ensure that the aerial cable or dish connection to this source is ground isolated.
How to fix no lights on my Arcam Amplifier?
To resolve the issue of no lights on your Arcam Amplifier, ensure the power cord is plugged into both the Receiver and a switched-on mains socket, and that the power button is pressed in. If a red LED is present, the Receiver is in standby mode; press any button on the front panel or remote control.
Essential guidelines for safe operation and handling of the apparatus.
Warnings about electric shock, voltage, installation precautions, and environmental handling.
Compliance info for US/EU customers and handling precautions.
Guidelines for responsible disposal and recycling of the product.
Introduction to the Arcam FMJ Receiver and its features.
Advice for professional installation and guidance for DIY setup.
Overview of the Arcam FMJ Receiver's capabilities and installation importance.
Guidelines for placement, power connection, and interconnect cable recommendations.
Advice on mitigating radio interference issues with the receiver.
List of trademarks and licensing information for audio technologies.
Details on HDMI, digital audio, and FM/DAB aerial connections.
Details on analogue audio, speaker outputs, power inlet, and control ports.
Details for connecting HDMI sources and tips for cable routing.
Details on digital/analogue inputs, Zone 2, preamplifier outputs, and headphone socket.
How to connect BD/DVD players, satellite receivers, and CD players.
Advice on aerial types and placement for optimal radio reception.
Using serial ports, network, USB, trigger, and IR ports for control and data.
Placement guidance for subwoofer, centre, height, and front speakers.
Positioning surround and surround back speakers for optimal audio.
Detailed instructions for speaker wire connection and bi-amping.
Connecting subwoofers and using external power amplifiers.
Instructions for powering on, standby, source selection, volume, and headphone use.
Using Stereo Direct mode for pure analogue stereo sound quality.
Setting up and controlling a second audio/video zone independently.
Accessing advanced settings like defaults, backups, and updating firmware.
Detailed explanation of front panel controls, buttons, indicators, and sockets.
Overview of remote features, usage guidelines, and battery installation.
Information on backlight, LEDs, modes, and device selection.
Using Code Learning, navigation, volume, and FCC compliance for the remote.
Operating the Arcam receiver and navigating USB/Network files using AMP mode.
Controlling BD/DVD players, televisions, and VCR devices with the remote.
Controlling set-top boxes, satellite receivers, and PVRs with the remote.
Controlling Arcam CD players and selecting CD source using the remote.
Configuring speaker types, crossover, channels, and distances for optimal sound.
Adjusting speaker levels for a balanced surround effect.
Overview of Dirac Live setup, calculations, and troubleshooting common issues.
Information on downloading the Dirac Live application and subwoofer setup advice.
Guide to navigating setup menus using remote or front panel, including help screens.
Configuring inputs, lip sync, and initial audio decode modes for sources.
Adjusting tone controls, EQ, Dolby Volume, stereo modes, and audio source selection.
Details on signal parameters, adjustments, HDMI features, CEC, ARC, and control settings.
Setting speaker types, distances, crossover frequencies, and channel assignments.
Calibrating speaker levels and assigning video sources to audio inputs.
Configuring Zone 2 settings and network audio client options.
Overview of decoding and processing modes for various audio sources.
Details on high resolution, Dolby Digital, and DTS audio format decoding.
Using Dolby Volume for consistent levels and configuring Dolby Atmos speaker setup.
Tuning stations, managing presets, and operating internet radio.
Selecting network/USB sources and managing internet radio favourites.
Playing music from USB, using vTuner, and Spotify Connect.
Setting up Zone 2 audio routing and using spare speaker outputs.
Connecting remote control devices for Zone 2 operation.
Copying functions, setting up the remote, and managing learned data.
Controlling device modes, other equipment, and using hidden commands.
Deleting learned data, locking modes, performing factory reset, and reading codes.
Troubleshooting power, remote, display, and picture production issues.
Addressing no sound, poor sound, or distorted audio quality.
Troubleshooting speaker output, decoding, hum, and reception interference.
Addressing source switching, volume, USB, network, and radio connectivity issues.
Specifications for AV860 inputs, outputs, general features, and the continual improvement policy.
Specifications for AVR850 power, inputs, outputs, dimensions, and accessories.
Specifications for AVR550 power, inputs, outputs, dimensions, and accessories.
Specifications for AVR390 power, inputs, outputs, dimensions, and accessories.
Specifications for SR250 power, inputs, outputs, dimensions, and accessories.
Details of the guarantee, claim procedures, and contact information for support.
Information on registering the product online.
Device codes for amplifiers and CD players from various manufacturers.
Device codes for DVD players, recorders, satellite boxes, TVs, and combo units.
Device codes for Blu-ray and HD-DVD players.
General| Receiver type | Surround |
|---|---|
| Frequency range | 20 - 20000 Hz |
| Audio output channels | 7.1 channels |
| Signal-to-Noise Ratio (SNR) | 110 dB |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 1500 W |
| Card reader integrated | No |
| Package weight | 20000 g |
| HDMI in | 7 |
| Ethernet LAN (RJ-45) ports | 1 |
| Number of HDMI outputs | 3 |
| 12V trigger | Yes |
| 12V trigger ports quantity | 2 |
| Speakers connectivity type | - |
| Supported radio bands | DAB, DAB+, FM |
| Internet radio services supported | Spotify |
| Audio decoders | DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD Master Audio |
| Apple docking compatibility | Not supported |
Weight and Dimensions| Depth | 425 mm |
|---|---|
| Width | 433 mm |
| Height | 171 mm |
| Weight | 16700 g |
To Next Page
