Need help?Do you have a question about the Arcam A19 and is the answer not in the manual?
General| Output level | 630 mV |
|---|---|
| Amplifier class | - |
| Frequency range | 20 - 20000 Hz |
| RMS rated power | 350 W |
| Output impedance | 230 Ω |
| Input sensitivity | 5 mV |
| Audio output channels | - channels |
| Peak power per channel | 90 W |
| Signal-to-Noise Ratio (SNR) | 80 dB |
| Total Harmonic Distortion (THD) | 0.003 % |
| RMS power output per channel (8 Ohm) | 50 W |
| Package weight | 10200 g |
| Audio (L/R) out | 7 |
| Headphone outputs | 1 |
| Headphone connectivity | 3.5 mm |
| Speakers connectivity type | Clamp terminals |
| Purpose | Home |
| Product color | Black |
| Connectivity technology | Wired |
| AC input voltage | 110-240 V |
Weight and Dimensions| Depth | 275 mm |
|---|---|
| Width | 432 mm |
| Height | 85 mm |
| Weight | 8500 g |
Essential instructions for safe operation and handling of the amplifier.
Confirmation of adherence to electrical safety standards like IEC/EN 60065 and FCC rules.
Various analogue inputs for connecting audio sources like CD players, tuners, etc.
Connections for loudspeakers, including single and bi-amping methods.
How to turn the amplifier on and off, and information about standby mode.
Checks to perform when there is no audio output from the amplifier.
Reasons for sound interruption, such as thermal overload or speaker impedance issues.
To Next Page
