Need help?Do you have a question about the Arcam A65 and is the answer not in the manual?
General| Input Impedance | 47k Ohms |
|---|---|
| Input Sensitivity | 250mV |
| Total Harmonic Distortion | 0.02% at 80% power, 1kHz |
| Signal to Noise Ratio | 100dB (A-weighted) |
| Dimensions | 430 x 360 x 85mm (W x D x H) |
| Power Consumption | 200W maximum |
| Power Output | 40W per channel into 8Ω |
Provides crucial safety precautions for installation and operation.
Confirms adherence to EN60065 international electrical safety standard.
Identifies the integrated and power amplifiers discussed in the handbook.
Refers to safety guidelines on the inside front cover for user protection.
Guidance on placing the amplifier for optimal performance and ventilation.
Instructions for connecting speakers using BFA terminals and wiring polarity.
Details on connecting to the mains supply, voltage checks, and plug compatibility.
Explains the function of the AV processor mode and its implications for volume control.
Instructions for connecting various audio/visual sources to the amplifier inputs.
How to connect turntables, including compatibility with MM and MC cartridges.
Adjusting volume and selecting audio sources using front panel controls.
Adjusting bass, treble, balance, and bypassing tone controls for sound quality.
How to switch the amplifier on/off and interpret the power indicator light.
Guide to recording audio from other sources onto tape.
Overview of the remote control's functions and compatibility with Arcam components.
Using the remote for selecting audio inputs and adjusting volume levels.
Basic controls for operating Arcam CD players with the remote.
Instructions for connecting loudspeakers to the P75 amplifier.
Details on connecting pre-amplifiers, processors, and other sources.
Guidance on connecting the P75 to the mains power supply.
Operation and features of the P75 power amplifier.
Essential safety precautions and connection checks before proceeding.
How to improve sound by dividing high and low frequency signals to separate cables.
Enhancing performance with separate amplification for different speaker drivers.
Power output ratings for different impedance loads and channels.
Details on input sensitivity, impedance, and noise levels for various sources.
Specifications for pre-amplifier, tape, and headphone outputs.
Details on dimensions, weight, and supplied accessories.
Details of the two-year warranty and coverage terms.
Instructions for warranty claims and Arcam customer support contact information.
Information on registering the product online for warranty and updates.
To Next Page
