EasyManua.ls Logo

Arcam A65 - Using the Remote Control; CR-389 Remote Control Overview; Input Selection and Volume Control; CD Player Controls

Arcam A65
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A65/A75/P75
7
FM DAB
PROG DISP
RPT
MODE BAND
1-9 2-10 3-11
FM
DAB
SEL
TUNER
CR-389
CD
AMPLIFIER
VCRDVD TAP EAV
TUNERCDAUXPHONO
ENTER
SP1
SP2
DISP
MENU DISP
4-12
5-13 6-14 7-15 8-16
Using the remote control
CR-389 Remote Control
The CR-389 remote control gives access to all functions
available on the front panel. It also has controls to operate
Arcam CD players, AM/FM and DAB tuners.
Input selection buttons
These operate in the same
way as the input selector
on the front panel of your
integrated ampli er.
Volume and Mute ( )
Press + to increase volume or to decrease the
output volume on the ampli er.
Press
to mute the speaker connections and
preamp outputs. Both tape outputs and the
headphone socket remain active.
Mute is disabled either by pressing
again, or
by adjusting the volume.
Tuner controls
These offer basic control of
Arcam tuners.
NOTE: Remember to install the two supplied AAA
batteries before trying to use your remote control!
Do not place anything in front of the IR receiver on the
left of the A65 or A75, or the remote control may not
work.
CD controls
These offer basic controls of
Arcam CD players.
Not used with A65/A75
These control features of other
ampli ers in the Arcam range.
Not used with A65/A75
The Power/Standby button does not
operate with the A65 and A75
ampli ers.

Table of Contents

Related product manuals