Need help?Do you have a question about the Arcam A85 and is the answer not in the manual?
General| Power Output | 85W per channel into 8 ohms |
|---|---|
| Frequency Response | 20Hz - 20kHz ±0.2dB |
| Input Impedance | 10k ohms |
| Inputs | 7 line level, MM phono |
| Damping Factor | 100 |
| Dimensions | 430 x 380 x 110mm |
| Input Sensitivity | 200mV for full output |
Detailed precautions for safe operation and installation.
Confirmation of meeting international safety standards.
Guidance on placing the amplifier for optimal performance and safety.
Instructions for connecting speaker cables to terminals.
Details on correct polarity and cable connection for speakers.
Information on using BFA terminals with different cable types.
Steps for safely connecting the amplifier to the mains power.
Details on connecting various audio sources and recording devices.
Explanation of buttons and knobs on the amplifier's front panel.
How volume control works and its relation to output power.
Functionality for selecting main and secondary speaker sets.
Information on connecting headphones to the amplifier.
How to listen to and record from different sources.
Instructions for copying audio between tape decks.
How to adjust volume, balance, bass, and treble.
How to customize features like volume resolution and welcome message.
Overview and function of the remote control handset.
How to switch the amplifier between standby and active modes.
Selecting main and secondary speaker sets via remote.
Adjusting volume and muting the audio output.
Instructions for connecting the P85 amplifier.
How to use the A85 to remotely switch the P85 on/off.
Information on upgrading the P85 with a Third Channel Module.
Function of the power button and status indicator light.
Selecting speaker sets for the P85 amplifier.
Important warnings and checks before connecting.
Explanation and steps for bi-wiring speaker connections.
How to enhance performance using separate amplification.
Step-by-step guide for configuring bi-amping.
Explanation of thermal cutout and protection system.
Troubleshooting for protection mechanism activation.
Power output ratings for different impedance and frequencies.
Specifications for various input types and sensitivities.
Details on nominal output level and impedance.
Power consumption, dimensions, weight, and accessories.
Details of the warranty coverage and terms.
Instructions on how to make a warranty claim.
Information on how to register the product online.
To Next Page
